產品介紹 Products Information

聯絡資訊 Contact
  • 半導體IC產品
  • 聯絡人: 劉小姐
  • 電話: +886-2-8772-8910 分機 619
聯絡資訊 Contact
  • 電子零件產品
  • 聯絡人: 林小姐
  • 電話: +886-2-8772-8910 分機618
聯絡資訊 Contact
  • 真空相關產品
  • 聯絡人: 王經理
  • 電話: +886-2-8772-8910 分機161
聯絡資訊 Contact
  • PCB機器
  • 聯絡人: 王小姐
  • 電話: +886-2-8772-8910 分機631
聯絡資訊 Contact
  • 化學相關產品
  • 聯絡人: 陳小姐
  • 電話: +886-2-8772-8910 分機633
聯絡資訊 Contact
  • 不確定品牌/型號
  • 聯絡人: 陳小姐
  • 電話: +886-2-8772-8910 分機633

LIGHTNINGCURE Spot light source LC8 : L9588

E-mail contact

+886-2-8772-8910

FEATURES
Two new functions for making photocuring simple and reliable!
1 Operate it from your PC via the RS-232C port.
This unit has a built-in RS-232C port to allow PC or microcomputer control that was impossible up until now. Making program entries (irradiation intensity, irradiation time) for the Memory Step is now accurate and easy. You can operate the light source even in a location where direct access to it is impossible.
Using the USB adaptor connector lets you use a PC even if it has no RS-232C port. We also offer sample software that displays easy-to-use setup screens, etc.

2 Light intensity monitor with internal optical feedback function

This unit maintains the light intensity at a fixed level for stable irradiation. Light intensity usually varies over time during lamp operation. Our light source, however, can constantly maintain the preset light intensity since it regulates light intensity while monitoring it with an internal sensor.
This spot light source also has internal light feedback and so does not need a dedicated feedback light guide used in conventional products.
The irradiation intensity (reference value) is displayed as a digital value (in watts) on the LCD display. This eliminates problems that occur due to human error and different operatingconditions. Full control even of detailed settings makes it ideal for fully automated production lines.
 
Memory Step™ for 9 types 7-step programs
Program the irradiation intensity and irradiation time to any level you want! Freely set the UV irradiation conditions to match the component you want to bond.
The LIGHTNINGCURE LC8 lets you store 9 types of 7-step programs in the memory, so optimal irradiation conditions matching the component for bonding can be set just by changing the program number. This holds true even when multiple bonding components are flowing in the same production process or when shifting to different production lines.
The LC8 is especially ideal for components that must be fixed in place with high precision. The mounting positions of these components often deviate due to
stress warping and contraction in the adhesive that causes positional shifts. Using the LC8 gives better production stability and higher product yield especially
for components demanding high position precision.

 

"Easy Maintenance" "Great Energy Saving"

 

CONTROL

Control

Front panel control

Communication connector
(RS-232C)

External control terminal
(D-SUB connector) *1

Main Power ON/OFF

Lamp ON/OFF

Shutter Drive

Open/Close

Auto Open/Close by Timer *2

Auto Shutter Time Setting

Irradiation Program (Memory Step™) Setting

Optical Power Adjustment (UP/DOWN)

Lamp ON Indicator

○ (Signal Output)

○ (Signal Output)

Lamp Stability Indicator

○ (Signal Output)

○ (Signal Output)

Shutter Open Indicator

○ (Signal Output)

○ (Signal Output)

Lamp Operation Hour Meter

Overheat Alarm

○ (Signal Output)

○ (Signal Output)

Lamp Operation Time Alarm

○ (Signal Output)

○ (Signal Output)

Operating Switch for Power Saving Mode *3

○ : available, — : not available
*1 10P terminal block is available as option E9795-01 (sold separately). 
*2 Corresponds to "start/stop" of Memory Step™.
*3 The operating switch is inside
 
SELECTION GUIDE

Type No.

Radiant wavelength range 

Lamp for maintenance 

Guaranteed life

L9566-01A / L9588-01A

[365 nm type]  300 nm to 450 nm

L10852

4000 h (at 365 nm)

L9566-02A / L9588-02A

[250 nm band enhanced type]   240 nm to 400 nm

L10852

4000 h (at 365 nm)

L9566-03 / L9588-03

[Visible light type]  400 nm to 700 nm

L8253

2000 h (at 436 nm)

L9566-04 / L9588-04

[Total reflection type]  300 nm to 800 nm

L8253

2000 h (at 436 nm)

L9566-06A / L9588-06A

[365 nm wide band type]  240 nm to 550 nm

L10852

4000 h (at 365 nm)

NOTE:
① Major radiant wavelengths. Various optical filters (sold separately) can also be attached. Refer to the radiant spectral distribution graph for details on the spectral distribution.
② L10852 is 200 W super-quiet mercury-xenon lamp. L8253 is 150 W super-quiet xenon lamp with ozone-free bulb.
 
SPECIFICATIONS

Parameter

L9566

L9588

Light Guide Port

Rear

Operation panel (front)

Lamp Replacement Position

Operation panel (front)

Rear

UV Intensity (Typ.) ⑴

4500 mW/cm2 Typ. (at 365 nm, -01A type)

Radiant Wavelength Range

Refer to the SELECTION GUIDE

Lamp for Maintenance

Refer to the SELECTION GUIDE

Lamp Service Life

Refer to the SELECTION GUIDE

Power Supply Input

100 V ac to 240 V ac (100 V / 200 V auto switching), single phase 47 Hz to 63 Hz

Power Consumption

280 VA Typ.

Weight

Approx. 6.4 kg

Operating Ambient Temperature

+5 °C to +35 °C

Storage Ambient Temperature

-10 °C to +70 °C

Operating and Storage Humidity

Less than 80 % (no condensation)

NOTE:
⑴ UV irradiance (at 365 nm) is measured in the center at a point 10 mm away from the output end of the A10014-35-0110 light guide (sold separately) with E5147-04, by using the Hamamatsu C6080-365 UV power meter.
 
Optical Power Monitor with Optical Feedback E9793-02

Parameter

Description / Value

Monitoring Wavelength

365 nm ⑵

Applicable Type

(L9566, L9588) -01A, -02A ⑶

NOTE:
 Monitoring at other wavelengths is not possible.
 When optical power monitor order with L9566 and L9588, please tell us the type No. whether (L9566, L9588)-01A-02 or (L9566, L9588)-02A-02.
 
DIMENSIONAL OUTLINES

 

檔案下載