● All-in-one light source built into the irradiation box
Just this one unit lets you start right away without having to design an irradiation box.
● Small enough to carry around with you
Size and weight are small enough to allow carrying it around with you for field work, and there are no special restrictions on installation positions or work environments.
● Irradiation time can be set as needed
The EX-mini allows easy and accurate tests and evaluations by setting the irradiation time you need.
● High safety design via interlocks and error signals, etc.
● Operates on AC100 V to AC240 V power source
● Ozone decomposition unit E12685 (option) for handy indoor exhaust (no exhaust ducts needed)
The EX-mini can be easily used anywhere since no exhaust duct installation is needed. Just attach the connector to the EX-mini to start operation.
Parameter
|
Description / Value
|
Emission wavelength
|
172 nm
|
Irradiance ①
|
50 mW/cm2
|
Irradiation area size (W×H)
|
86 mm × 40 mm
|
Lamp design life ②
|
2000 h
|
Input voltage (AC)
|
100 V to 240 V
|
Power consumption
|
150 VA or less
|
Cooling method
|
Forced air cooling by fan or duct
|
Duct suction air flow rate ③④
|
0.25 m3/min to 0.35 m3/min
|
Operating / storage temperature range
|
+5 °C to +35 °C / -25 °C to +55 °C
|
Operating / storage humidity range
|
10 % to 80 % / below 80 % (no condensation)
|
Control method
|
Panel control / external control
|
Weight
|
6.5 kg
|
① Value calculated on the assumption that the irradiance is measured with a Hamamatsu UV power meter C9536/H9535-172 placed in the immediate vicinity of the lamp.
② When replacing the lamp, please specify the lamp type No. L12681-02.
③ Suction air flow rate of cooling and ozone exhaust air ducts.
④ Prepare exhaust duct or use our ozone decomposition unit E12685 (option) that does not exhaust duct.
DIMENSIONAL OUTLINE (Unit: mm)