+886-2-8772-8910
Product Name / Type No. |
Over View |
---|---|
Adapter Block |
The A10030 series is an adapter block for connecting a PMT module to a V- groove type optical block. |
C-Mount Adapter Block |
This block connects a device having C-mount to V-groove type optical blocks. The connection angle for the device and block is adjustable. |
Fiber Adapter Block |
Optical fiber cables with FC or SMA connectors can be connected to the blocks in the A10037 series. |
Beam Expander Block |
This optical block widens the diameter of a collimated beam of light to 2.5 times its original size or narrows the diameter to 1/2.5 times its original size. |
Joint Block |
The A10038 series is a joint block for connecting one optical block to another. The joint is available in two types: MM (male-male) type and FF (female-female) type. |
Cuvette Holder Block |
This holder block is a small dark box specifically designed for cuvettes with an optical path length of 10 mm, and allows easy measurement of samples in combination with various optical blocks. |
Shutter Block |
The A10036 is a manual shutter block with a plate that is opened and closed by sliding it left and right. Light is sufficiently blocked so there will be no problem even at photon counting levels. |
ND Filter Block |
A neutral density (ND) filter is included in this optical block to attenuate light levels. |
Filter Block |
This optical block contains a filter that passes only particular wavelengths. Bandpass filters and long-pass filters are available. |
Interchangeable Filter Block |
The A10033-90 is a holder block for assembling a commercially available 15 mm diameter filter. |
Dichroic Block |
This block contains a dichroic mirror that reflects particular wavelengths but passes other wavelengths. A total of six products are available. |
Beam Splitter Block |
This optical block uses a cubic type half-mirror. Incident light is split into reflected and transmitted beams at a ratio of 1 to 1. |
Beam Splitter Holder Block |
The A10035-90 is a holder block designed to hold a 15 mm cubic type beam splitter. |
Stage Block |
This is a dark box equipped with 2 micrometers for positionings. It allows light measurements even under room lighting by externally connecting various types of optical blocks. |
Beam Aligner Block |
This optical block is for using an infinity-corrected objective lens to guide laser light into an optical fiber with an attached FC connector or to collimate and transmit the beam from a fiber-optic cable. |
Tube Lens Block |
This block contains a focusing lens with a focal distance of 100 mm and is used for an infinity-corrected objective lens. Aberration is reduced due to the use of an achromatic lens. |
Pinhole Holder Block |
This is a feed screw type holder block that can hold a commercially available, mount type pinhole and adjust its position in the XY direction. Light passing through the pinhole is collimated by the lens installed in the block and is output. |
C-Mount Interchangeable Filter Block |
The A11213 series is a C-mount connection block for installing a commercial- ly available 25 mm diameter filter or lens. This block allows angle adjustment and so is useful as a spacer or adapter that connects between C-mounts. |
C-Mount Ring |
This ring is for connecting a PMT module to a optical block and an equip- ment with C-mount. |
C-Mount Interchangeable Dichroic Block |
The A11214 is a C-mount connection block for installing a dichroic mirror for use at a 45° angle of incidence. |
Polarizer Holder Block |
This is a holder block designed for a polarizer. |
Parts Set |
This maintenance kit includes a set of screws and O-rings needed to as- semble optical blocks. |