+886-2-8772-8910
Parameter |
Specification |
Unit |
---|---|---|
Optical interferometer |
Michelson interferometer (with a built-in ϕ3 mm movable mirror) |
- |
Photodetector |
InGaAs PIN photodiode |
- |
Light input method*1 |
Optical fiber input type (with SMA connector) |
- |
Interface |
USB 2.0 |
- |
Dimensional outline*2 |
49 × 57 × 76 (excluding protrusions) |
mm |
Weight |
Approx. 300 |
g |
Parameter |
Symbol |
Condition |
Value |
Unit |
---|---|---|---|---|
Operating temperature |
Topr |
No dew condensation |
+5 to +50 |
°C |
Storage temperature |
Tstg |
No dew condensation |
-20 to +70 |
°C |
Parameter |
Symbol |
Condition |
Min. |
Typ. |
Max. |
Unit |
---|---|---|---|---|---|---|
Spectral response range |
λ |
|
- |
1100 to 2500 |
- |
nm |
Spectral resolution |
- |
λ=1533 nm |
- |
5.7 |
8 |
nm |
Wavelength reproducibility |
λr |
|
-0.5 |
- |
0.5 |
nm |
Wavelength |
λTd |
|
-0.06 |
- |
0.06 |
nm/°C |
Signal‐to‐noise ratio |
S/N |
|
10000 |
- |
- |
- |
Parameter |
Min. |
Typ. |
Max. |
Unit |
---|---|---|---|---|
A/D conversion |
- |
16 |
- |
bit |
Drive frequency |
225 |
275 |
325 |
Hz |
USB bus power current consumption |
- |
450 |
500 |
mA |
Spectral response (typical example) | Spectral resolution vs. wavelength (typical example) | |
S/N vs. gain setting (typical example) | ||
By installing the evaluation software (HmFTIR02Main.exe) into a PC, you can perform the following basic operations.
‧ Acquire and save measured data
‧ Measurement condition setting
‧ Acquire module information (type no., serial number, spectral response range, etc.)
‧ Display graphs
‧ Arithmetic function
Compare against reference data (absorbance and the like)
Note:
Up to eight FTIR engines can be connected to a single PC and used.
Compatible OS: Microsoft® Windows® 10 (32-bit, 64-bit)
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries
|