MPPC module: C13367 series

Language
- 日本語
- English

產品介紹 Products Information

MPPC module: C13367 series

E-mail contact

+886-2-8772-8910

Features

Equipped with an MPPC with a flexible cable

(for precision measurement)

The flexible cable makes it easy to arrange the MPPC. High sensitivity in the short wavelength range Low noise equivalent power

Built-in temperature compensation circuit

Compact and lightweight

Analog output

Applications

Flow cytometry

Low-level light measurement

Fluorescence measurement

Analytical instruments

Structure

Parameter	Symbol	C13367-1350EA	C13367-3050EA	C13367-6050EA	Unit
Eﬀective photosensitive area	-	1.3 × 1.3	3 × 3	6 × 6	mm
Pixel pitch	-	50			μm
Number of pixels	-	667	3600	14400	-

Absolute maximum ratings

Parameter	Symbol	Condition	Values	Unit
Supply voltage	Vs		±6	V
Operating temperature	Topr	No dew condensation*1	-20 to +60	°C
Storage temperature	Tstg	No dew condensation*1	-20 to +80	°C

*1: When there is a temperature diﬀerance between a product and the surrounding area in high humidity environment, dew condensation may occur on the product surface. Dew condensation on the product may cause deteration in characteristics and reliability.

Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings.

Electrical and optical characteristics (Ta=25 °C, λ=λp, Vs=±5 V, unless otherwise noted)

Parameter		Symbol	Condition	C13367-1350EA			C13367-3050EA			C13367-6050EA			Unit
Parameter		Symbol	Condition	Min.	Typ.	Max.	Min.	Typ.	Max.	Min.	Typ.	Max.	Unit
Spectral response range		λ		320 to 900			320 to 900			320 to 900			nm
Peak sensitivity wavelength		λp		-	500	-	-	500	-	-	500	-	nm
Temperature stability of output voltage		-	Ta=25±10 °C	-	-	±5	-	-	±5	-	-	±5	%
Photoelectric sensitivity		-		0.7 × 10	1.0 × 10	1.3 × 10	0.7 × 10	1.0 × 10	1.3 × 10	0.7 × 10	1.0 × 10	1.3 × 10	V/W
Cutoﬀ frequency	High band	fc	-3 dB, sinewave	3.5	5	-	3.5	5	-	2.5	3.5	-	MHz
Cutoﬀ frequency	Low band	fc	-3 dB, sinewave	DC			DC			DC			-
Noise equivalent power		NEP	Dark state	-	0.5	1	-	1.2	2	-	2.3	4.6	fW/Hz1/2
Minimum detection limit		-	Dark state	-	1	2	-	2.7	4.5	-	4.3	8.6	pW rms
Maximum output voltage		-		-	4.7	-	-	4.7	-	-	4.7	-	V

Electrical characteristics

Parameter	Symbol	Condition	Min	Typ	Max	Unit
Supply voltage*	+Vs		4.75	5	5.25	V
Supply voltage*	-Vs		-4.75	-5	-5.25	V
Current consumption	Ic	+Vs	-	50	250	mA
Current consumption	Ic	-Vs	-	-20	-40	mA

* A power supply with 300 mA or higher output must be used.

Block Diagram

Connection Example

Using the supplied power cable, connect the MPPC module to a power supply. You can observe the MPPC module’s output waveform by connecting the module to an oscilloscope.

Measurement example

Analog Output

Photoelectric sensitivity vs. wavelength

Linearity

檔案下載

C13367 series datasheet